YABO WM1610K2 51.2V 200Ah Wall Mounted Battery Powerwall Off-Grid LiFePO4 Systems For Home Energy Storage

Description:

WM1610K 48V 200Ah LiFePO4 Battery Pack

10.24kWh Wall-Mounted Energy Storage Battery for Solar & Home Backup

The WM1610K 48V 200Ah LiFePO4 Battery Pack is a high-capacity wall-mounted energy storage solution designed for residential solar systems, backup power, off-grid applications, and small commercial energy storage. With a nominal voltage of 51.2V, a capacity of 200Ah, and 10.24kWh usable energy storage, it provides a practical balance between high energy capacity, long service life, system safety, and installation efficiency.

Built with high-quality lithium iron phosphate technology, the WM1610K is engineered for frequent charge and discharge cycles. Its integrated battery management system, intelligent display, multiple communication interfaces, and expandable parallel architecture make it suitable for modern solar energy storage systems where reliable operation and system integration are essential.

The wall-mounted structure also helps installers save valuable floor space while maintaining a clean and professional installation appearance.

Key Features at a Glance

1. 10.24kWh High-Capacity Energy Storage

With 51.2V nominal voltage and 200Ah capacity, the WM1610K provides approximately 10.24kWh of energy storage in a single battery unit. This capacity is suitable for storing excess solar energy during the day and supplying stored power during the evening, nighttime, or periods of low solar generation.

For homeowners and system integrators, this means fewer battery units may be required to achieve the desired storage capacity, helping simplify system design while providing substantial energy reserves.

2. Grade A LiFePO4 Prismatic Cells

The battery uses Grade A prismatic LiFePO4 cells, combining high energy density with excellent cycle stability. Lithium iron phosphate chemistry is widely used in energy storage because of its strong thermal stability and long service life.

The WM1610K is designed for repeated daily cycling and can achieve 6,000+ cycles under specified operating conditions, making it suitable for long-term solar storage and backup power applications.

3. Intelligent 200A Battery Management System

A built-in 200A BMS continuously monitors key battery operating parameters and provides multiple layers of protection.

The BMS helps protect the battery against:

• Overcharge
• Over-discharge
• Over-current
• Short circuit
• Abnormal operating conditions
• Temperature-related risks

This intelligent protection architecture helps maintain stable battery operation while reducing the risk of damage caused by improper charging, excessive discharge, or abnormal electrical conditions.

Reliable Power for Home Backup

Power interruptions can affect lighting, communication equipment, refrigeration, networking devices, security systems, and other essential household loads.

The WM1610K can be integrated into a compatible backup power system to provide stored energy when grid electricity is unavailable.

Combined with an appropriate hybrid or off-grid inverter, the battery can support applications such as:

• Home backup power
• Emergency energy storage
• Solar self-consumption
• Off-grid homes
• Villas
• Vacation properties
• Small offices
• Workshops
• Remote buildings

For households with solar panels, the battery provides an additional layer of energy independence by allowing stored solar energy to be used when photovoltaic generation is insufficient.

Flexible Applications

The WM1610K 48V 200Ah LiFePO4 Battery Pack can be used across a wide range of energy storage projects.

Residential Solar Storage

Store excess photovoltaic energy and use it later to improve solar self-consumption.

Home Backup Power

Provide stored energy for essential household loads during grid interruptions.

Off-Grid Energy Systems

Combine the battery with solar panels and a compatible inverter to create an independent power system for remote properties.

Villas & Large Homes

The 10.24kWh capacity provides a strong foundation for higher-demand residential energy storage systems, while multiple units can be connected for additional capacity.

Small Commercial Applications

The battery can also be considered for offices, shops, studios, workshops, and other small commercial facilities requiring reliable energy storage.

Solar Installer Projects

Its standardized 48V-class architecture and multiple communication interfaces make it suitable for professional solar and battery storage system integration.

B2B OEM & ODM Battery Customization

For distributors, solar companies, system integrators, and energy storage brands, YABO provides OEM and ODM customization for the WM1610K platform.

Customization options can include:

• Brand logo
• Product labeling
• Enclosure design
• Battery configuration
• BMS configuration
• Communication interface
• System parameters
• Packaging
• Project-specific battery solutions

This allows customers to develop a branded energy storage product without having to build a battery platform from scratch.

The product images also demonstrate customization possibilities including LOGO customization, battery configuration, control panel, interface, shell, package box, voltage, capacity and BMS customization.

For larger projects, YABO can work with customers to define the battery configuration according to inverter requirements, installation environment, capacity requirements, and target market specifications.

A Scalable Battery Platform for Residential Energy Storage

The WM1610K 48V 200Ah LiFePO4 Battery Pack is designed for customers looking beyond a basic battery pack. Its combination of 10.24kWh capacity, Grade A LiFePO4 cells, intelligent BMS, wall-mounted construction, communication interfaces, long cycle life, and parallel expansion creates a flexible platform for modern energy storage projects.

Whether the goal is to increase solar self-consumption, build a reliable home backup system, develop an off-grid power solution, or deploy a larger multi-battery energy storage project, WM1610K provides a scalable foundation.

For B2B customers, the added advantage is customization. YABO can support OEM/ODM requirements ranging from branding and packaging to battery configuration and system-level solutions, helping distributors and energy storage companies bring differentiated products to their target markets.

Choose WM1610K when you need a high-capacity 48V LiFePO4 battery that combines residential energy storage performance, intelligent battery management, installation flexibility, and scalable system architecture.